dmesg - apache benchmark
x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
Linux version 4.6.4-201.fc23.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 5.3.1 20160406 (Red Hat 5.3.1-6) (GCC) ) #1 SMP Tue Jul 12 11:43:59 UTC 2016
Command line: placeholder root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
Released 0 page(s)
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009cfff] usable
Xen: [mem 0x000000000009dc00-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x00000000acaeefff] usable
Xen: [mem 0x00000000acaef000-0x00000000acaeffff] ACPI NVS
Xen: [mem 0x00000000acaf0000-0x00000000acb19fff] reserved
Xen: [mem 0x00000000acb1a000-0x00000000c90fafff] usable
Xen: [mem 0x00000000c90fb000-0x00000000c9c7efff] reserved
Xen: [mem 0x00000000c9c7f000-0x00000000c9e7efff] ACPI NVS
Xen: [mem 0x00000000c9e7f000-0x00000000c9efefff] ACPI data
Xen: [mem 0x00000000c9eff000-0x00000000c9efffff] usable
Xen: [mem 0x00000000c9f00000-0x00000000ce7fffff] reserved
Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Xen: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
Xen: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
Xen: [mem 0x00000000fedb0000-0x00000000fedbffff] reserved
Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Xen: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
Xen: [mem 0x0000000100000000-0x000000042f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: HP HP EliteDesk 800 G2/8053, BIOS N01 Ver. 02.09 01/24/2016
Hypervisor detected: Xen
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x42f800 max_arch_pfn = 0x400000000
MTRR: Disabled
e820: last_pfn = 0xc9f00 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000097000] 97000 size 24576
BRK [0x02062000, 0x02062fff] PGTABLE
BRK [0x02063000, 0x02063fff] PGTABLE
BRK [0x02064000, 0x02064fff] PGTABLE
BRK [0x02065000, 0x02065fff] PGTABLE
BRK [0x02066000, 0x02066fff] PGTABLE
BRK [0x02067000, 0x02067fff] PGTABLE
RAMDISK: [mem 0x04000000-0x05387fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBE20 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000C9EFD0E8 0000AC (v01 HPQOEM SLIC-BPC 00000000 01000013)
ACPI: FACP 0x00000000C9EF1000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: DSDT 0x00000000C9ED0000 01D989 (v02 HPQOEM 8053 00000000 INTL 20121018)
ACPI: FACS 0x00000000C9E6A000 000040
ACPI: SSDT 0x00000000C9EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018)
ACPI: TCPA 0x00000000C9EFB000 000032 (v02 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C9EFA000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
ACPI: UEFI 0x00000000C9E76000 000042 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C9EF4000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018)
ACPI: SSDT 0x00000000C9EF3000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018)
ACPI: MSDM 0x00000000C9EF2000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: HPET 0x00000000C9EF0000 000038 (v01 HPQOEM 8053 00000001 HP 00000001)
ACPI: APIC 0x00000000C9EEF000 0000BC (v01 HPQOEM 8053 00000001 HP 00000001)
ACPI: MCFG 0x00000000C9EEE000 00003C (v01 HPQOEM 8053 00000001 HP 00000001)
ACPI: SSDT 0x00000000C9ECF000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C9ECE000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C9ECD000 000E6E (v02 CpuRef CpuSsdt 00003000 INTL 20121018)
ACPI: ASF! 0x00000000C9ECC000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
ACPI: FPDT 0x00000000C9ECB000 000044 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: BGRT 0x00000000C9ECA000 000038 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to Xen PV.
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x000000042f7fffff]
NODE_DATA(0) allocated [mem 0x3e50d6000-0x3e50ecfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042f7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000acaeefff]
node 0: [mem 0x00000000acb1a000-0x00000000c90fafff]
node 0: [mem 0x00000000c9eff000-0x00000000c9efffff]
node 0: [mem 0x0000000100000000-0x000000042f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042f7fffff]
On node 0 totalpages: 4163693
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12804 pages used for memmap
DMA32 zone: 819409 pages, LIFO batch:31
Normal zone: 52192 pages used for memmap
Normal zone: 3340288 pages, LIFO batch:31
p2m virtual area at ffffc90000000000, size is 2200000
Remapped 225170 page(s)
Reserving Intel graphics stolen memory at 0xcc800000-0xce7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0xacaef000-0xacaeffff]
PM: Registered nosave memory: [mem 0xacaf0000-0xacb19fff]
PM: Registered nosave memory: [mem 0xc90fb000-0xc9c7efff]
PM: Registered nosave memory: [mem 0xc9c7f000-0xc9e7efff]
PM: Registered nosave memory: [mem 0xc9e7f000-0xc9efefff]
PM: Registered nosave memory: [mem 0xc9f00000-0xce7fffff]
PM: Registered nosave memory: [mem 0xce800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: Registered nosave memory: [mem 0xfed85000-0xfedaffff]
PM: Registered nosave memory: [mem 0xfedb0000-0xfedbffff]
PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xff6fffff]
PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
e820: [mem 0xce800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.5.3 (preserve-AD)
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff88041be00000 s99096 r8192 d31976 u262144
pcpu-alloc: s99096 r8192 d31976 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4098612
Policy zone: Normal
Kernel command line: placeholder root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
software IO TLB [mem 0x417e00000-0x41be00000] (64MB) mapped at [ffff880417e00000-ffff88041bdfffff]
Memory: 15903464K/16654772K available (8060K kernel code, 1333K rwdata, 3256K rodata, 1568K init, 1540K bss, 751308K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
Using NULL legacy PIC
NR_IRQS:65792 nr_irqs:1024 0
xen:events: Using FIFO-based ABI
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen: --> pirq=9 -> irq=9 (gsi=9)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
tsc: Detected 3320.304 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6640.60 BogoMIPS (lpj=3320304)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81ed7000 - ffffffff81edf000)
ftrace: allocating 30244 entries in 119 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
Could not initialize VPMU for cpu 0, error -38
Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
installing Xen timer for CPU 1
installing Xen timer for CPU 2
installing Xen timer for CPU 3
x86: Booted up 1 node, 4 CPUs
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xacaef000-0xacaeffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xc9c7f000-0xc9e7efff] (2097152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 12:19:18, date: 07/28/16
NET: Registered protocol family 16
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: registering gsi 9 triggering 0 polarity 0
ACPI: Executed 4 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880415A11800 0006C3 (v02 PmRef Cpu0Ist 00003000 INTL 20121018)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804159A5C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880415A12000 0005AA (v02 PmRef ApIst 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804159D7400 000119 (v02 PmRef ApCst 00003000 INTL 20121018)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xce800000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe1120000-0xe112ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xe114a000-0xe114afff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe114b000-0xe114bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x4080-0x4087]
pci 0000:00:16.3: reg 0x14: [mem 0xe114f000-0xe114ffff]
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xe1148000-0xe1149fff]
pci 0000:00:17.0: reg 0x14: [mem 0xe114e000-0xe114e0ff]
pci 0000:00:17.0: reg 0x18: [io 0x4088-0x408f]
pci 0000:00:17.0: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:17.0: reg 0x24: [mem 0xe114c000-0xe114c7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a117] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xe1144000-0xe1147fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xe1140000-0xe1143fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xe1130000-0xe113ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xe114d000-0xe114d0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xe1100000-0xe111ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [1283:8893] type 01 class 0x060401
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pci 0000:02:00.0: [10b7:9055] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x3000-0x307f]
pci 0000:02:00.0: reg 0x14: [mem 0xe1000000-0xe100007f]
pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:01:00.0: bridge window [mem 0xe1000000-0xe10fffff]
pci 0000:01:00.0: bridge window [io 0x3000-0x3fff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0xe1000000-0xe10fffff] (subtractive decode)
xen: registering gsi 13 triggering 1 polarity 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x6e, I/O: command/status = 0x66, data = 0x62
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xacaef000-0xafffffff]
e820: reserve RAM buffer [mem 0xc90fb000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9f00000-0xcbffffff]
e820: reserve RAM buffer [mem 0x42f800000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
hugetlbfs: disabling because there are no supported hugepage sizes
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: registering gsi 8 triggering 1 polarity 0
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
xen: registering gsi 1 triggering 1 polarity 0
pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
xen: registering gsi 12 triggering 1 polarity 0
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 SYN0100 SYN0002 (active)
xen: registering gsi 4 triggering 1 polarity 0
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
system 00:08: [io 0x0200-0x023f] has been reserved
system 00:08: [mem 0xfedb0000-0xfedbffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xce800000-0xce81ffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
PM-Timer failed consistency check (0xffffff) - aborting.
pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:02:00.0: BAR 6: assigned [mem 0xe1020000-0xe103ffff pref]
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:01:00.0: bridge window [mem 0xe1000000-0xe10fffff]
pci 0000:00:1c.0: PCI bridge to [bus 01-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xce800000-0xf7ffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe10fffff]
pci_bus 0000:02: resource 4 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 5 [mem 0xe1000000-0xe10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20000K (ffff880004000000 - ffff880005388000)
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1469708359.621:1): initialized
Initialise system trusted keyring
workingset: timestamp_bits=34 max_order=22 bucket_order=0
zbud: loaded
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
aer 0000:00:1c.0:pcie02: service driver aer loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: intel_idle yielding to none
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Warning: Processor Platform Limit not supported.
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
0000:00:16.3: ttyS4 at I/O 0x4080 (irq = 19, base_baud = 115200) is a 16550A
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x2f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xe114c000 port 0xe114c100 irq 148
ata2: SATA max UDMA/133 abar m2048@0xe114c000 port 0xe114c180 irq 148
ata3: SATA max UDMA/133 abar m2048@0xe114c000 port 0xe114c200 irq 148
ata4: SATA max UDMA/133 abar m2048@0xe114c000 port 0xe114c280 irq 148
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xe114c000 port 0xe114c380 irq 148
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.6.4-201.fc23.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.6.4-201.fc23.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x6a
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x6a
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x6a
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x6a
microcode: Microcode Update Driver: v2.01 , Peter Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: f59e5d94ca289ff085a1a1af5a6825606dd58184'
zswap: loaded using pool lzo/zbud
Magic number: 8:653:330
tty tty51: hash matches
rtc_cmos 00:03: setting system clock to 2016-07-28 12:19:18 UTC (1469708358)
PM: Hibernation image not present or could not be loaded.
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-4: new low-speed USB device number 2 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=0499
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 04d9:0499 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:0499.0001/input/input6
hid-generic 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:14.0-4/input0
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-10: WDC WD10EZEX-60WN4A0, 01.01A01, max UDMA/100
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-60W 1A01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-5: new low-speed USB device number 3 using xhci_hcd
usb 1-5: New USB device found, idVendor=413c, idProduct=2107
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: Dell USB Entry Keyboard
usb 1-5: Manufacturer: Dell
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:413C:2107.0002/input/input7
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fdc38bf142, max_idle_ns: 440795336348 ns
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: hp TSST DVDRW SU-208HB, HR10, max UDMA/100
ata3.00: configured for UDMA/100
hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-5/input0
scsi 2:0:0:0: CD-ROM hp TSST DVDRW SU-208HB HR10 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
usb 2-8: new SuperSpeed USB device number 2 using xhci_hcd
ata4: SATA link down (SStatus 4 SControl 300)
usb 2-8: New USB device found, idVendor=0bda, idProduct=0329
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-8: Product: USB3.0 Card Reader
usb 2-8: Manufacturer: Realtek
usb 2-8: SerialNumber: 201408282030
ata6: SATA link down (SStatus 4 SControl 300)
Freeing unused kernel memory: 1568K (ffffffff81d4f000 - ffffffff81ed7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 116K (ffff8800017e3000 - ffff880001800000)
Freeing unused kernel memory: 840K (ffff880001b2e000 - ffff880001c00000)
random: systemd urandom read with 93 bits of entropy available
systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization xen.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
audit: type=1130 audit(1469708360.080:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1469708360.086:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1469708360.100:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708360.124:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
random: nonblocking pool is initialized
audit: type=1130 audit(1469708360.200:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708360.236:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708360.242:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708360.289:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
usb-storage 2-8:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-8:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
[drm] Initialized drm 1.1.0 20060810
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
3c59x: Donald Becker and others.
0000:02:00.0: 3Com PCI 3c905B Cyclone 100baseTx at ffffc90003ad0000.
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
clocksource: Switched to clocksource tsc
3c59x 0000:02:00.0 enp2s0: renamed from eth0
e1000e 0000:00:1f.6 eth0: registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) dc:4a:3e:72:c4:5a
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
e1000e 0000:00:1f.6 eno1: renamed from eth0
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:07: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
audit: type=1130 audit(1469708361.231:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
scsi 6:0:0:0: Direct-Access Generic- USB3.0 CRW 1.00 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[207]: Received SIGTERM from PID 1 (systemd).
SELinux: 32768 avtab hash slots, 103756 rules.
SELinux: 32768 avtab hash slots, 103756 rules.
SELinux: 8 users, 14 roles, 4944 types, 306 bools, 1 sens, 1024 cats
SELinux: 92 classes, 103756 rules
SELinux: Permission validate_trans in class security not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 144.600ms.
systemd[1]: Relabelled /dev and /run in 13.919ms.
[drm] RC6 on
EXT4-fs (dm-0): re-mounted. Opts: (null)
audit_printk_skb: 108 callbacks suppressed
audit: type=1130 audit(1469708363.462:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1469708363.511:48): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
audit: type=1130 audit(1469708363.600:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708363.647:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708364.025:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-readonly comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708364.054:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708364.073:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
xen:xen_evtchn: Event-channel device installed
xen_pciback: backend is vpci
Rounding down aligned max_sectors from 4294967295 to 4294967288
audit: type=1130 audit(1469708364.804:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
audit: type=1130 audit(1469708365.640:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708365.685:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Error: Driver 'processor_aggregator' is already registered, aborting...
tpm_tis 00:0a: 1.2 TPM (device-id 0x1B, rev-id 16)
Error: Driver 'processor_aggregator' is already registered, aborting...
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
wmi: Mapper loaded
parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
ppdev: user-space parallel port driver
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
Adding 8191996k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8191996k FS
ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880411cb7360 (20160108/exresop-593)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160108/dswexec-460)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff88041789ccd0), AE_AML_OPERAND_TYPE (20160108/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88041789cd20), AE_AML_OPERAND_TYPE (20160108/psparse-542)
ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880411cb7480 (20160108/exresop-593)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160108/dswexec-460)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff88041789ccd0), AE_AML_OPERAND_TYPE (20160108/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88041789cd20), AE_AML_OPERAND_TYPE (20160108/psparse-542)
ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880411cb75a0 (20160108/exresop-593)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160108/dswexec-460)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff88041789ccd0), AE_AML_OPERAND_TYPE (20160108/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88041789cd20), AE_AML_OPERAND_TYPE (20160108/psparse-542)
input: HP WMI hotkeys as /devices/virtual/input/input9
hp_wmi: query 0x5 returned error 0x3
ACPI Error: Attempt to CreateField of length zero (20160108/dsopcode-168)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff88041789cc80), AE_AML_OPERAND_VALUE (20160108/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88041789cd20), AE_AML_OPERAND_VALUE (20160108/psparse-542)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Line=0x1b
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
audit_printk_skb: 9 callbacks suppressed
audit: type=1130 audit(1469708368.573:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1469708369.226:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
xen_acpi_processor: Uploading Xen processor PM info
audit: type=1130 audit(1469708369.355:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708369.389:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[616]: Received request to flush runtime journal from PID 1
audit: type=1130 audit(1469708370.132:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
mei_wdt mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02: Could not register event ret=-22
mei_wdt: probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02 failed with error -22
audit: type=1130 audit(1469708381.399:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708381.726:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1469708381.726:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708381.841:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1469708381.842:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708381.854:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708381.866:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1469708381.866:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708381.994:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1469708382.177:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
enp2s0: setting full-duplex.
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
fuse init (API version 7.24)
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
virbr0: port 2(vnet0) entered learning state
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered disabled state
device vnet1 entered promiscuous mode
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered listening state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 3(vnet1) entered learning state
virbr0: port 3(vnet1) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered disabled state
device vnet2 entered promiscuous mode
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered listening state
virbr0: port 4(vnet2) entered learning state
virbr0: port 4(vnet2) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 4(vnet2) entered disabled state
device vnet2 left promiscuous mode
virbr0: port 4(vnet2) entered disabled state
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered disabled state
device vnet2 entered promiscuous mode
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered listening state
virbr0: port 4(vnet2) entered learning state
virbr0: port 4(vnet2) entered forwarding state
virbr0: topology change detected, propagating
usb 1-9: new high-speed USB device number 5 using xhci_hcd
usb 1-9: New USB device found, idVendor=0781, idProduct=5572
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: Cruzer Switch
usb 1-9: Manufacturer: SanDisk
usb 1-9: SerialNumber: 4C532000050525108475
usb-storage 1-9:1.0: USB Mass Storage device detected
scsi host7: usb-storage 1-9:1.0
scsi 7:0:0:0: Direct-Access SanDisk Cruzer Switch 2.01 PQ: 0 ANSI: 6
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.